Anemometer SV8
Composed of 3 cups conical shaped injected on a stainless steel shaft.
The transducer consist on one pair led & phototransistor which provides a pulse output with frequency proportional to wind speed
Combined with high performance shielded bearings ensure excellent linearity, over the whole range of measure and high reliability on different temperature-humidity conditions. Low moment of inertia, low-threshold, fast response and low distance constant are guaranteed.
The variety of outputs suit most data loggers on market.
Wind vane SD8
Consist of one aluminium and steel wind vane attached to a shaft that incorporates a diametric magnet that actuates on a rotary position sensor giving an output equivalent to the direction indicated by the wind vane.
As there is not mechanical contact, there is not friction and so a high life expectancy
A low-threshold and fast response are guaranteed.
The variety of outputs suit most data loggers on market.
Environment
Sensors body is Al-Si aluminium injection moulded and rust preventive painted.
M12 IP65 polarizing connectors are equipped for an easier operation.
Bearings
Both sensors are composed of stainless steel, shielded bearings, which give them excellent dynamic characteristic with very low mechanical friction.
Heating
Optionally both sensors could be provided of internal heating system, in order to avoid bearings and shaft freezing. It is strongly recommended in cold climates.
SV8 - SD8 Technical Data
Technical Data SV8
General
| Encoder | Rotary Incremental Photocoupler |
| Range | 0~60 m/s |
| Threshold | 0,3 m/s |
| Accuracy | ±3% |
| Output options | - Pulses (frequency directly proportional to wind speed) |
| - Current (4-20mA) | |
| - Digital 485 Mod-bus | |
| Distance constant | < 2m |
Electrical Features
| Power supply |
5~26VDC 11~26VDC for 4-20mA |
| Consumption | 90 mW (@ 12V) |
| Operating Temperature | -30ºC~70ºC (with heating) |
Mechanics
| Case | Al-Si aluminium injection moulded and rust preventive painted |
| Weight | 290 gr (cup wheel included) |
| Cup Wheel Diameter | 120 mm |
| Case Diameter | 50 mm |
| Height | 190 mm (cup wheel included) |
Additional Accessories
| Shaft Heating System | - Low power heating ( 10w ) |
| - Thermostat controlled 4ºC of activation threshold |
Technical Data SD8
General
| Encoder | Hall Effect Magnetic |
| Range | 1º~360º |
| Wind Threshold | 0,3 m/s at 10º deflection |
| Damping factor | 0,5 |
| Resolution | 1,41º |
| Accuracy | 1,41º |
| Output options | - 8-bits Gray code |
| - Synchronous serial | |
| - Current (4-20mA) | |
| - Digital 485 Mod-bus |
Electrical Features
| Power supply |
5~26VDC 11~26VDC for 4-20mA |
| Consumption | 150 mW (@ 12V) |
| Operating Temperature | -30ºC~70ºC (with heating) |
Mechanics
| Case | Al-Si aluminium injection moulded and rust preventive painted |
| Weight | 390 gr. (vane included) |
| Vane Length | 235 mm |
| Case Diameter | 50 mm |
| Height | 240 mm (vane included) |
Additional Accessories
| Shaft Heating System | - Low power heating ( 10w ) |
| - Thermostat controlled 4ºC of activation threshold |
